This apprenticeship has been retired

This is not the latest approved version of this apprenticeship. View the latest version

Overview of the role

Operating in highly regulated industries where the impact of loss is high.

Risk and safety management professional (degree)

Reference Number: ST0465

Details of standard

OCCUPATION AND OCCUPATIONAL PROFILE

Risk and Safety Management Professional: In highly regulated industries where the impact of loss is high, risk and safety management professionals work collaboratively with other disciplines. They establish the context of the problem, identify all hazards including those with the potential to cause a major accident, analyse the associated risk, evaluate the risk against acceptance criteria and propose ways of treating the risk such that it is eliminated or reduced and maintained as low as reasonably practicable. They are required to address means of monitoring and reviewing the actual risk and safety performance, and communicating and consulting risk issues with all relevant stakeholders.

Whilst the emphasis on specific aspects of the risk profile and use of specific techniques may differ slightly between industries, the overriding risk management process is the same for all. Whether practitioners work in ‘systems’ sectors such as nuclear, defence, rail and aviation, for example, or in ‘process’ industries such as oil and gas, petrochemical and chemical, the risk management processes, safety management systems, and organisational and human factors are all fundamentally the same.

This apprenticeship creates rounded professionals capable of working competently in their chosen industry but with the risk and safety management knowledge, skills and behaviours that are transferable across all highly regulated industries.

Such professionals typically work in the fields of technical safety, safety and reliability, nuclear safety, chemical and process safety, rail safety, product safety and air safety.

ENTRY REQUIREMENTS: Whilst any entry requirements will be a matter for individual employers, typically an apprentice might be expected to have already achieved a relevant science, technology, engineering or mathematics (STEM) bachelor degree or equivalent.

KNOWLEDGE, SKILLS AND BEHAVIOURS:

Knowledge

 

Risk Management Principles and Practice

Understand the principles and practice of risk management, including the framework for embedding risk and safety management into the overall management system, and the application of the risk management process.

Risk Assessment Techniques

Knowledge of the selection and utilisation of systematic techniques for risk assessment that are appropriate to the context. Understand the preferred methods and levels of assessment for particular application in the chosen industrial sector.

 

Domain

Understand the chosen industrial sector, its structure, purposes and operations. Understand how risk and safety management is used and how it interacts with other disciplines within operating companies, their supply chain and other dependent sectors.

 

Specialisms

Knowledge of particular specialist subjects and domains as required to meet employers’ needs, for example in relation to emerging technologies or current key focus areas.

Skills

 

 

 

Risk and Safety Management

Apply knowledge and understanding of risk and safety management to practical situations through the full lifecycle. Ability to recognise the context and accurately select and apply systematic methods of identifying hazards, analysing and evaluating associated risks, and proposing proportionate solutions to treat problems. Ably handle the wider implications of work as a risk and safety practitioner such as application of relevant regulations and emergency planning.

 Lifecycle View

Critically observe risk and safety leadership behaviours of self and others and reflect on their effectiveness, noting the importance of influence as well as authority.

Leadership

Identify stakeholders and clarify their needs. Identify and investigate influencing factors and be able to effectively communicate risk and

safety problems to relevant stakeholders. Approach problems from different perspectives and work collaboratively with other disciplines. Apply different risk and safety techniques, from the range of tools available, to generate ideas and solutions with others.

 Effective Communication​

 

Problem-Finding and Creative Problem-Solving​

 

Behaviours

 

 High Reliability Mindset

A healthy scepticism about whether systems and processes are working effectively. Challenge and test assumptions and avoid over-simplification of complex risk issues. Conversely, avoids over-complication, and applies a proportionate level of analysis. Courage and conviction in the face of adversity, backing up conclusions with evidence.

Change, Adapting and Visualising

A willingness to recognise and assess change in risk and safety management contexts, whether engineering, organisational or procedural. Reflect on the change and adapt own approach. Open to abstract ideas and concepts as well as real world systems and processes. Communicate visually the concepts and ideas and be able to assess the feasibility of practical solutions.

 Improving

A drive to make designs, solutions and processes better from a risk and safety perspective. Work with teams to conjecture, research, innovate and clarify improvements. Co-operative. Solicit stakeholder feedback on proposals and assess benefits and sacrifices to arrive at effective improvements.

 Professional Participation

Plan and review own development needs and carry out CPD. Regularly reflect on own competence and behavioural development. Comply with the obligations of own professional institution. Personal commitment to high standards of professional conduct including reliability, honesty, integrity and ethics. Actively engage in forums advancing risk and safety management as a profession.

DURATION: The typical duration will be three years, depending on the amount of academic study and relevant vocational experience achieved each year.   

QUALIFICATIONS:    Apprentices must complete an MSc in risk and safety management (at level 7); recognition of prior experiential learning is allowable where appropriate. Apprentices without level 2 English and Maths will need to achieve this level prior to the End Point Assessment (EPA).

LINK TO PROFESSIONAL REGISTRATION: The apprentice will achieve the standard of risk and safety management professional. This apprenticeship provides evidence of knowledge, skills and behaviours in line with the professional registration requirements for Chartered Engineer, however, the apprentice may also need to acquire additional experience. The apprenticeship may also align with the professional registration requirements of relevant professional bodies regulated by the Engineering Council but the apprentice may additionally need to acquire further specific experience.

LEVEL:  This is a Level 7 apprenticeship.       REVIEW:   This standard will be reviewed after 3 years.

 


Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence

Status: Retired
Level: 7
Degree: non-integrated degree
Reference: ST0465
Version: 1.0
Date updated: 12/06/2023
Approved for delivery: 24 September 2018
Route: Engineering and manufacturing
Typical duration to gateway : 36 months (this does not include EPA period)
Maximum funding: £19000
LARS Code: 346
EQA Provider: Ofqual
Employers involved in creating the standard: Airbus, Alstom, Risktec, Aspire Consulting, BAE Systems, DSTL, Ebeni Ltd, EDF Energy, Lockheed Martin, Maersk Oil North Sea, MoD Defence Safety Authority, NEBOSH, Network Rail, NNL, NuGeneration, Rolls-Royce, RSSB, Sellafield, Siemens, Thales, Transport for London

Version log

Version Change detail Earliest start date Latest start date
1.1 End-point assessment plan revised 12/06/2023 Not set
1.0 Approved for delivery 24/09/2018 11/06/2023

Is this webpage useful?

Thank you for your feedback

Tell us about your experience