This apprenticeship has been retired

This is not the latest approved version of this apprenticeship. View the latest version

Overview of the role

Designing and developing electronic circuits, devices and systems for a range of industries.

Embedded electronic systems design and development engineer (degree)

Reference Number: ST0151

Details of standard

Occupation

The role of the Embedded Electronic Systems Design and Development Engineer is to apply their knowledge of electronics and of embedded software to the design of circuits or devices that provide a useful function, that are capable of being manufactured at a competitive cost, and that are reliable and safe in use. This involves the use of the engineer’s knowledge of electronics and electronic principles, married to an expertise in the end use of the final product. In electronics this end use can cover a wide spectrum. Examples of industrial sectors that rely heavily on Embedded Systems Design and Development Engineers include Aerospace, Automotive, Automation and Instrumentation, Robotics, Telecommunications, Information and Computer Technology, Defence, Energy (including renewables), Transport and Consumer Electronics. The role provides the basis of learning with potential to specialise as a Hardware Engineer, Software engineer or Systems Engineer in these sectors and can extend from design of integrated circuits through to complete systems.

Embedded Electronic Systems Design and Development Engineers will spend their careers in these industries developing the next generations of products such as smartphones, electric vehicles, communications satellites, smart grids and bringing concepts such as smart cities into reality. For others, an initial grounding in design and development will prove an excellent launch pad for a career in applications engineering, product management, marketing or general management.

The Embedded Electronic Systems Design and Development Engineer must be proficient in a wide range of skills, underpinned by academic understanding, to enable them to work across these sub-sectors and specialisms.

Apprentices will complete a Degree that will support the fundamental scientific and mathematical principles that equip them with the understanding required to operate effectively and efficiently at a high level within any of these sectors. This will be supported by vocational training to develop the required competencies specific to particular roles within the chosen sectors.

Requirements

A competent Embedded Electronic Systems Design and Development Engineer will meet the following requirements:

Knowledge

What is required

Electrical circuit theory

Understanding of basic electrical theory

Electronic components

Knowledge of the method of operation of basic semiconductors and passive components including their most common uses. Also the basic formulas used in their application

Analogue and digital design techniques

Understanding of design of both analogue and digital circuits and the basic design rules for mixed analogue and digital circuit boards

Structured software

Comprehension of the fundamentals of structured software design

Company Specifics

Understanding key aspects of the employer’s business and product applications – against a template to be generated by the employer

Skills

What is required

Circuit design

Design functional electronic systems and circuits from component level

Circuit layout

Utilise modern CAD technology to implement circuit design with understanding of considerations for heat dissipation, electrical interference and other industry specific considerations affecting layout

Structured programming for embedded software

Write and document structured code to comply with industry norms and to allow others to understand and subsequently maintain/modify the code

Mathematical modelling

Utilise modelling techniques for circuit design, embedded software development and thermal management

Design for purpose

Ability to demonstrate an understanding of the principles and practice of design for market, design for manufacturability, design for testability and design for maintainability

Testing methodology

Ability to develop a test plan for a product that they have developed

Product transition into production

Ability to explain the process by which a product is introduced into production, including what aspects are discussed at what stage and with whom and how development gateways work
 Project Management Ability to develop a basic project plan including resource planning, time planning, use of contingencies etc. Also techniques for predicting pinch points and strategies for timescale recovery
 Compliance Awareness of international standards and compliance requirements for the products designed by the employer. Ability to discuss the differences between legislative and non-legislative requirements
 Commercial awareness Ability to demonstrate knowledge of basic business fundamentals including costs, overheads, gross margin, net margin, profit, and cash
 Health and Safety

Ability to demonstrate awareness and understanding of basic health and safety principles both in the general workplace and specific to electronic circuit design

Behaviours

What is required

Motivation

Self-starter, organised thinker. Works safely and effectively without close supervision

Communication

Confident in oral, written and electronic methods. Ability to communicate effectively with all levels of stakeholder

Team ethos and leadership

Exhibits leadership behaviour and qualities. Demonstrable ability to work as a member of a team.

Continuous development

Committed to personal learning and development

Problem solving/practicality

Enjoys problem solving. Able to demonstrate practical capabilities in their professional role.

Responsibility

Accepts responsibility for own work and that of others

Ethics and professional standards

Exercises responsibilities in an ethical manner and respects and complies with company rules and guidelines. Able to commit to beliefs, goals, and standards of their employer and the wider industry and its professional standards


D
uration

 The duration of this apprenticeship is unlikely to be less than 36 months.

Entry Requirements

Individual employers will set their own entry requirements in terms of prior academic qualifications and experience. Typically candidates will have attained A-Level standard or equivalent, in Maths and at least one further STEM based subject such as Physics, ICT, Computing or Electronics and will have English Language at GCSE (grade C or above).

Level

The Apprenticeship Standard is at Level 6. 

Qualifications

An Honours Degree in Electronics or Electrical & Electronic Engineering which has been accredited by one of the Professional Engineering Institutions licensed by the UK Engineering Council.

Apprentices without a Level 2 English and maths must complete this prior to taking the end-point assessment.

Professional Registration

Completion of the Apprenticeship will be recognised by the relevant Professional Engineering Institutions.

Review

The standard will be initially reviewed after three years to ensure it reflects employer demand for changes in the syllabus.


Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence

Status: Retired
Level: 6
Degree: non-integrated degree
Reference: ST0151
Version: 1.0
Date updated: 11/10/2021
Approved for delivery: 10 June 2016
Route: Engineering and manufacturing
Typical duration to gateway : 36 months (this does not include EPA period)
Maximum funding: £27000
LARS Code: 107
EQA Provider: Ofqual
Employers involved in creating the standard: Renishaw, Imagination Technologies, Siemens, ABB, Emerson Process Management, Automated Technology Group (Autotech), MTL Instruments, Schneider Electric, Selex, GE Aviation, Alstom, Gambica, NMI, Arun Technology, Specac, MSE, TechUK, Electronics Yorkshire

Version log

Version Change detail Earliest start date Latest start date
1.1 End-point assessment plan revised 19/12/2022 Not set
1.0 Approved for delivery 10/06/2016 18/12/2022

Is this webpage useful?

Thank you for your feedback

Tell us about your experience