Manually weld tubes and pipes to high standards of quality.
This occupation is found in a wide range of sectors where piping systems are used for fluid transport and pressure containment. This will include Engineering Construction, Maintenance and Project upgrades, Oil & Gas (upstream extraction, bulk fluid transport & distribution, downstream processing), Chemicals & Pharmaceuticals (manufacturing and process plant); Power Generation (Thermal, Biomass & Nuclear); Food, Dairy & Brewery Process plant and equipment; Water and Water treatment (processing, bulk transport & distribution and remediation); and Fuel & Coolant systems for Transport Vehicles (Aerospace, Marine, Road & Rail systems). Employers range in size from small businesses to multi-national organisations.
The broad purpose of the occupation is to manually weld tubes and pipes to high standards of quality and integrity using a minimum of two manual arc welding processes from Tungsten Inert Gas (TIG), Plasma Arc Welding (PAW), Manual Metal Arc (MMA), Metal Inert Gas (MIG)/Metal Active Gas (MAG) and Flux Cored Arc Welding (FCAW). The occupation requires the pipe welding of a minimum of four material groups from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys. Pipe welders must use all welding positions and 3 main joint configurations from Single Sided Butt, Socket, Flange and Set-on Branch welds. For example, a pipe welder might use Tungsten Inert Gas (TIG) and Manual Metal Arc (MMA) to join Carbon Steel, Low Alloy Steel, Austenitic Stainless Steel and Nickel Alloy materials. Each welding process requiring significantly different welding equipment, assemblies, controls, skills and techniques, and represents an individual production process. Each material type requires specific controls and techniques to achieve a satisfactory weld. The final components being welded are often used in highly safety critical applications for the movement and control of high temperature fluids, cryogenic fluids, highly corrosive or flammable media, and are regulated by the Pressure Equipment Directive. Some piping systems are used in the processing of pharmaceuticals, food and drink, where welding and fabrication control of pipe bore cleanliness is vital to the hygiene and integrity of the installation and quality of goods manufactured. Pipe Welders are required to continually monitor and adapt their orientation to achieve the quality of work demanded by high integrity piping systems, necessitating significant manual dexterity, and coordination. This is essential to the UK economy as Pipe Welders are key to the successful fabrication, construction and repair & maintenance of major infrastructure projects. Pipe welders are required to work to detailed engineering specifications necessary to ensure safe & reliable operation of the finished pipe work system. Pipe welders support many employers in the construction, engineering and manufacturing sectors. They can be employed by the supply chain organisations or the direct owner/operator.
In their daily work, an employee in this occupation interacts with a wide range of people and organisations including Supervisors, Engineers, Pipe Fitters, Riggers, Stores Operatives, Welding Inspectors, Non-Destructive Technicians, Quality personnel, Insurance Inspectors and associated Technicians (e.g. Thermal Treatment, Non-Destructive Testing). Pipe welders’ work is regularly assessed to ensure continued quality of welding though visual inspection, non-destructive testing and pre-commissioning pressure testing (hydraulic or pneumatic testing).They can work anywhere in the world and provide services in a range of demanding environments, including working at height, confined spaces, on live plant and equipment. This could include fabrication workshops, oil rigs, power stations, process plant facilities, on-board marine vessels. Pipe welders may need to work shifts and flexible work patterns. They can work in organisations ranging from multi-national organisations to very small businesses.
An employee in this occupation will be responsible for the safety, quality, productivity and accuracy of their own work whilst ensuring it conforms to a relevant pipe welding specification. Ensuring the bore cleanliness is maintained to the requirements of the piping system to assure the integrity of the system, components and product that will flow within the completed pipe system. Pipe Welders can hold a range of responsibilities ranging from working autonomously during their planning and production activities to being an integrated part of a wider team working on the overall pipework system, reporting to a workplace supervisor. This can vary based on the size of organisation and sector in which they work.
| Duty | KSBs |
|---|---|
|
Duty 1 Plan and prepare for the pipe welding activities before commencing work |
K3 K4 K6 K7 K8 K9 K10 K11 K12 K13 K15 K17 K18 K19 K20 K21 K23 K25 |
|
Duty 2 Check materials conform to the specified grades, dimensions, thicknesses and diameters. |
|
|
Duty 3 Inspect weld preparations, assembly and apply remedial material conditioning appropriate to the preparation processes applied |
|
|
Duty 4 Align and position pipes to be welded, recognising ovality, mismatch, clean contamination and foreign material ingress exclusion requirements |
K4 K5 K6 K9 K19 K20 K21 K22 K23 K25 |
|
Duty 5 Establish necessary purging and bore protection of the weld deposit, using dams, barriers, pastes or fluxes |
|
|
Duty 6 Set-up and check the equipment to be used in the preparation and welding of pipes and tubes |
|
|
Duty 7 Adjust and maintain the equipment to be used during the welding of pipes and tubes, applicable to the process being used |
|
|
Duty 8 Read, interpret and apply technical specifications, inspection criteria & drawings to establish detailed welding process controls, bore protection methods and consumable selection |
K3 K4 K5 K9 K10 K11 K12 K13 K14 K17 K18 K19 K20 |
|
Duty 9 Use appropriate tools, equipment and techniques to weld pipe and tubes, whilst considering welding parameters on the integrity of the finished material properties, characteristics and risk of defects. |
K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 K19 K20 K21 K22 K23 K24 K25 K26 K27 K28 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S15 S16 S17 S18 S19 S20 S21 S22 |
|
Duty 10 Monitor productivity, quality and consumable consumption throughout the welding of components and identify areas for improving the production process where possible (e.g. access & positioning, technique modification, filler metals, welding gas, purging gas, fluxing systems, electrodes). |
K7 K11 K13 K15 K17 K18 K20 K21 K22 K23 K25 |
|
Duty 11 Adjust parameters throughout the welding of components, recognising the need to adapt to accommodate ongoing changes in welding position and technique (e.g. Preheat, Interpass Temperature, Heat Input). |
|
|
Duty 12 Remove material using manual powered and non-powered hand tools before welding to clean the pipe bore, remove non-integral tack welds, dress anomalies in weld preparations and remove latent defects. |
|
|
Duty 13 Remove material using manual powered and non-powered hand tools, during welding to remove defects (e.g. porosity) and to prevent potential defects being created (e.g. Slag traps). |
|
|
Duty 14 Inspect the completed initial weld run to confirm bore penetration level, profile, oxidation and linear shrinkage prior to final closure then visually inspect the bore side deposit and profile using appropriate inspection techniques |
K1 K2 K3 K4 K6 K7 K9 K10 K11 K12 K13 K16 K20 K21 K25 K26 K27 K28 |
|
Duty 15 Monitor component changes and associated with weld shrinkage, visually inspecting the weld deposit during pipe and tube welding operations. |
K1 K2 K13 K15 K16 K19 K20 K21 K25 K27 |
|
Duty 16 Inspect the final pipe weld and component to ensure, surface finish, weld profile and component geometry meet specification |
|
|
Duty 17 Dress finished weld cap as required in the specification to accommodate subsequent inspection techniques. |
K13 K16 K19 K20 K21 K22 K23 K27 K28 |
|
Duty 18 Restore the work area, welding equipment, and purging devices to a safe and reliable condition on completion of welding |
|
|
Duty 19 Return unused consumables for re‐conditioning and re-use or disposal. |
|
|
Duty 20 Collate and submit quality records information including batch identification, welder identification, weld map and quality dossier |
K3 K4 K5 K7 K10 K12 K13 K14 K15 K17 K18 K19 K20 K21 K22 K23 K24 K25 K26 K27 K28 |
K1: The mechanical properties (strength, ductility, toughness, etc.), physical properties (dimensions, weight, corrosion susceptibility, contamination) of commonly welded materials.
Back to Duty
K2: The fundamentals of welding metallurgy (Weld Metal Solidification and Heat Affected Zone) and how this can affects weldability of materials and final joint integrity
Back to Duty
K3: The common manual arc welding processes and the relative merits for a given application including Tungsten Inert Gas (TIG), Manual Metal Arc (MMA), Plasma Arc Welding (PAW), Metal Inert Gas (MIG), Metal Active Gas (MAG), Flux Cored Arc Welding (FCAW)
Back to Duty
K4: Pipe and tube weld joint types (Butt, Socket, Set-on Branch, Set-In Branch, Set-Through Branch, Flange) and the relative merits of the multiple preparation types (e.g. J-, V-, U- and double/triple compound angles) and their effect on pre-welding pipe preparation times, weld shrinkage, restrictive access to the pipe weld preparation, welding technique to be adopted and risk of causing defects during welding production.
Back to Duty
K5: The welding positions and progression directions associated with welding pipe e.g. Rotated Pipe; Horizontal - Fixed Vertical Pipe; Vertical Weld - Fixed Horizontal Pipe (either upward or downward progression); Inclined - Fixed 45 degree Pipe Overhead (either upward or downward progression).
Back to Duty
K6: Pipe bore contamination and how weld root profile affects product performance in service (corrosion, erosion, flow restriction, post-weld conditioning treatments, product contamination (e.g. food, beverage, pharmaceutical) or damage to other components within the piping system (e.g. valves/turbines)
Back to Duty
K7: Welding controls to establish and maintain the key primary parameters associated with the welding process (e.g. Current, Arc Voltage, Wire Feed Speed, Shielding Gas Flow Rates, Electrode Polarity etc.)
Back to Duty
K8: The major components of welding equipment, ancillary equipment, cabling and their assembly, including Power Source, Wire Feed System, TIG & PAW Arc Initiation Systems, interconnecting communications cables, torches, tongs, gas equipment etc.
Back to Duty
K9: Purging systems and damming mechanisms, including their relative merits and limitations, locating relative to the weld and subsequent removal from the piping system (e.g. dams, bungs, foams, ashless paper, soluble films etc.)
Back to Duty
K10: Purging gas selection and its relative merits for a given material and weld location/orientation within a piping system, considering its buoyancy, leakage path, risk of asphyxiation, reaction with the molten weld pool and potential effect on weld metal properties.
Back to Duty
K11: The relative merits of purge gas injection into the bore to consider the route of gas supply, orifice diameter, volume to be purged, flow rate, acceptable oxygen levels, turbulence effects, waiting time to achieve specified levels and trigger point for withdrawal of purge protection from pipe bore
Back to Duty
K12: Flux based bore side root protection mechanisms (bore side fluxes, pastes, flux-carrying consumables such as flux coated and flux-cored rod stock (e.g. MMA, TIG, FCAW etc.), deoxidants within solid wires) and their relative merits, limitations and risks (post weld conditioning processes, foreign material exclusion requirements, product media contamination, downstream component degradation).
Back to Duty
K13: Welding Procedure Specification requirements, content and information derived to establish specific production information
Back to Duty
K14: Welder Approval Certificates content and definitions to determine scope of coverage
Back to Duty
K15: Mechanisms to measure, monitor and control secondary welding parameters (e.g. Bore Cleanliness, Bore side Oxidation, Heat Input, Interpass Temperature), linear shrinkage
Back to Duty
K16: Identification and the causes of typical welding defects and how their occurrence can be reduced.
Back to Duty
K17: Different types and functions of welding consumables and the requirement for correct identification, storage, conditioning, handling and recycling or disposal.
Back to Duty
K18: The requirements for correct storage, handling and segregation of materials and tooling to prevent cross contamination between sensitive materials
Back to Duty
K19: When and how to use material removal processes (powered and non‐powered tools)
Back to Duty
K20: Supporting activities often provided by others and must be checked to ensure the successful production of pipe welding activities (bore alignment, ovality, bore contamination, fitting, purging, thermal treatment).
Back to Duty
K21: Welding quality documentation, organisational reporting systems, procedures and their role within the overall quality process
Back to Duty
K22: Performance success factors in production, inspection reporting, productivity, bore cleanliness/contamination etc.
Back to Duty
K23: Risks and mitigation measures associated with welding and the working environment, and the organisational risk management processes
Back to Duty
K24: Statutory, quality, organisational and health, safety and environmental regulations
Back to Duty
K25: Typical problems that may arise within their normal work activities/environment
Back to Duty
K26: Organisational systems to control and administer approved processes, procedures, documentation and the potential implications for the organisation if not followed.
Back to Duty
K27: Continuous improvement processes, performance review and how this is undertaken within their organisation.
Back to Duty
K28: Non-destructive testing reports and radiographs including identification of particular defect types and the associated improvements to process and techniques needed to prevent recurrence
Back to Duty
S1: Work safely at all times, comply with health & safety and environmental legislation, regulations and organisational requirements
Back to Duty
S2: Obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation)
Back to Duty
S3: Plan all preparatory tasks and interfaces and pipe welding activity, before commencing work
Back to Duty
S4: Obtain, position and assemble welding equipment and associated safety protection needed for each activity
Back to Duty
S5: Prepare, check and protect materials and work areas ready for welding
Back to Duty
S6: Inspect the assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected
Back to Duty
S7: Receive, inspect, condition and maintain consumables
Back to Duty
S8: Set, test, and monitor key welding parameters as detailed within the Welding Procedure Specification and adjust as necessary to accommodate changing orientation as the weld progresses around the pipe joint.
Back to Duty
S9: Set-up purge protection within the pipe bore and associate monitoring methods
Back to Duty
S10: Set-up bore side protection controls to avoid foreign material ingress into the pipe bore
Back to Duty
S11: Remove materials using manual processes, including powered and non-powered equipment
Back to Duty
S12: Achieve a quality of work to meet international standards e.g. ISO 5817, ISO 9606, ASME IX, ASME B31.3 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection, including Time of Flight and Phased Array methods).
Back to Duty
S13: Monitor weld quality and dimensions throughout welding activity and on completion of welding and report any issues through organisational production / quality control process prior to release for formal examination by others
Back to Duty
S14: Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location
Back to Duty
S15: Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques
Back to Duty
S16: Complete any required documentation using the defined recording systems at the appropriate stages of the work activity
Back to Duty
S17: Produce pipe welds using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW
Back to Duty
S18: Produce pipe welds using four material groups from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys
Back to Duty
S19: Produce pipe welds covering ALL defined pipe welding positions. These are Flat - Rotated Pipe; Horizontal - Fixed Vertical Pipe; Vertical Weld - Fixed Horizontal Pipe (either upward or downward progression); Inclined - Fixed 45 degree Pipe Overhead (either upward or downward progression)
Back to Duty
S20: Produce pipe welds in 3 main joint configurations from Single Sided Butt, Socket, Flange and Set-on Branch.
Back to Duty
S21: Produce pipe welds in by continually adjusting the orientation of the welder, welding torch, and welding consumable filler, including restricted access conditions
Back to Duty
S22: Produce pipe welds in restricted access conditions by welding with both left and right hands (e.g. boiler tube bundles, proximity of other plant and equipment, limited access locations, welds located with limited visibility of the weld joint)
Back to Duty
B1: Takes responsibility for decision-making, without autonomy and within the guidelines of the work instruction, for their workplace, the application of welding processes, and for their productivity
Back to Duty
B2: Enquires and seeks guidance, in order to understand the processes and associated industrial applications.
Back to Duty
B3: Committed to maintaining competence through Continuing Professional Development planning, preparation and reflection to ensure safety, quality and production and ensuring Continuing Professional Development goals are achieved.
Back to Duty
B4: Intervene and challenge poor practice and have confidence to channel feedback to the appropriate authorities to implement change.
Back to Duty
B5: Consistently and reliably deliver expectations in safety, production, quality, ethics and self-development
Back to Duty
B6: Encourages and supports the development of others and completes point of work risk assessments.
Back to Duty
B7: Follows the specified procedures and controls and be personally responsible and accountable for their production work and personal development
Back to Duty
B8: Reflect on current and past performance and provide information and recommendations for continuous improvements in efficiency and effectiveness of working practices, and training and development requirements
Back to Duty
This standard aligns with the following professional recognition:
3
48
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| 1.0 | Approved for delivery | 19/07/2019 | Not set |
Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence